These detailed cast resin sheets have been prepared rom my own moulds and masters. They feature a fully textured surface and recessed joint / mortar lines. Careful painting followed by dry brushing will bring out all the detail in the castings. My patterns for these wall kits are entirely hand made as I believe it enables the creation of superior surface textures in comparison to many computer manufactured methods.
 
 
A pack contains two wall sides and a pair of capping strips.
 
Each wall side piece measures 175mm x 35mm (37mm with capping fitted). Interlocking ends reduce the visibility of the joint between pieces. The castings are single sided, enabling lamination onto thick card or similar for low relief/ single sided walls, or can be laminated back to back for walls that are visible from both sides. 
 
Each piece can be rotated meaning that up to 700mm of wall can be built before the stone pattern repeats. Each piece is roughly 2mm thick with sufficient flexibility to allow curvature (without using hot water) that might be needed when following field boundaries, lanes and railway lines. The resin is easily cut to size if necessary, first scored with a heavy knife, then snapped. Colour of resin may vary from that shown.
 
The photographs show examples of the pieces you will receive, and a couple of samples to show how a finished wall could look. Instructions included.