7mm Narrow Gauge O-16.5

VANS

 
Covered Goods Van pack of parts including roof (NG09)

These goods vans are a freelance design intended to reflect the common features of this kind of vehicle. The sides and ends feature planking and bolt detail together with the characteristic outside framing so typical of late Victorian goods vehicle design. The pack includes two side castings featuring a pair of hinged doors, a pair of ends and a pre-formed plain styrene roof section.

 

The parts glue together easily with superglue enabling the rapid construction of the body shell. The builder is only required to fabricate a simple floor from styrene card or similar and source a suitable chassis. The body is designed to conceal a ready to run OO gauge chassis, or alternatively and etched brass compensated unit could be used. The photographs show the parts you will receive together with test build and painted sample to illustrate what the final vehicle could look like when finished and detailed. 

 

The finished body dimensions in all types are approx. 92mm x 42mm.

 

Goods Brake Van pack of parts including roof (NG11)

This brake van is a freelance design intended to reflect the common features of this kind of vehicle. 

The sides and ends feature planking and bolt detail together with the characteristic outside framing so typical of late Victorian goods vehicle design. The pack includes two side castings with doorways at both ends, and two end castings with twin windows. The van can then be constructed as two variants. One with the duckets as shown creating a van with doors at just one end, or as an alternative, constructed without the duckets but with doors at each end. A pair of duckets is included, together with a pre-formed plain styrene roof section.

The parts glue together easily with superglue enabling the rapid construction of the body shell. The builder is only required to fabricate a simple floor from styrene card or similar and source a suitable chassis. The body is designed to conceal a ready to run OO gauge chassis, or alternatively and etched brass compensated unit could be used. The photographs show the parts you will receive together with a test build in white and a painted sample to illustrate what the final vehicle could look like when finished and detailed. This sample model uses a Hornby brake van chassis with extended foot boards.

The finished body dimensions are approx. 92mm x 42mm (excluding duckets)

4 Ton Covered Van kit (NG13)
also available as body only kit (NG14)

This is a useful small van for compact layouts. The kit comes complete with chassis, metal wheels and brass bearings. The chassis is easy to assemble for smooth reliable running. Parts are included to represent simple either side brake gear acting on a single shoe.

 

This is a freelance design intended to reflect the common features of a typical narrow gauge 4 ton van. The sides and ends feature planking and bolt detail together with the characteristic outside framing.

 

The photographs show the parts you will receive together with a prototype test build and a painted sample to illustrate what the final vehicle could look like when finished and detailed.

 

The finished body dimensions are approx. 70mm x 40mm.

Milk Van (NG10)

A useful vehicle for milk churn traffic tacked on the rear of the morning passenger service or conveying soft fruit ready for market.

 

These vans are a freelance design intended to reflect the common features of this type of vehicle. The sides and ends feature planking and bolt detail together with the characteristic outside framing so typical of late Victorian goods vehicle design. The pack includes two side castings featuring a pair of hinged doors and top louvres, a pair of louvered planked ends with top door, and a pre-formed plain styrene roof section. 

 

The parts glue together easily with superglue enabling the rapid construction of the body shell. The builder is only required to fabricate a simple floor from styrene card or similar and source a suitable chassis. The body is designed to conceal a ready to run OO gauge chassis, or alternatively an etched brass unit could be used.

 

The display model in the photos is riding on a modified version of my O-16.5, 4-wheel coach chassis kit. The roof has been detailed with a simple rain strip using micro strip. Torpedo roof vents were from the spares box.

 

The finished body dimensions are approx. 92mm x 42mm.

 

The photographs show the parts you will receive together with a painted sample to illustrate what the final vehicle could look like when finished and detailed. (Please note the sacks, churns and other scenic items shown in some photos are not included and can be purchased separately.)